|
Cargo Trailers
Flat & Utility Trailers
Horse Trailers
Stock Trailers
Mini Trucks
Flatbeds
Accessories
Contact Us
| |
Horse Trailers
Click here to see all CM
Trailers.
The CM Norstar LX all
aluminum 3 & 4 Horse with KWG Custom conversion living quarters.
Custom living
quarter packages available for many horse, stock and cargo trailers.
 
CM Custom Built Show Steer Special
Call for details and pricing.
CM Legacy 4 Horse aluminum
skin, steel frame. Optional red skin shown.
Legacy
Aluminum exterior with steel frame slant load gooseneck horse trailer with front
slant tack room and rear tack compartment
Standard Features
Available sizes
2-HORSE gooseneck, 13' floor length w/2-5200# axles, 15" tires & 6-hole
wheels
3-HORSE gooseneck, 17' floor length w/2-5200# axles, 15" tires & 6-hole
wheels
4-HORSE gooseneck, 20' floor length w/2-6000# axles, 16" tires & 8-hole
wheels
Dimensions
7' or 6'-6" body height
7' or 6' body width
7' gooseneck length
Undercarriage
Rubber torsion axles with four wheel independent suspension and greasable hubs
for easy lubrication
Electric brakes on all wheels
Radial tires on silver modular wheels with chrome center caps
Spare tire, wheel and rack
Coupler & Jacks
Adjustable hitch stem with 2-5/16" coupler and safety chains with hooks
Heavy duty low profile gooseneck structure
Single speed drop-leg jack
Emergency breakaway system: switch, cable and battery box complete with battery
(less charger)
Design Features & Hardware
Low profile 6" radius corner aluminum roof
All steel tubular frame and side structure with .050 pre-painted white smooth
aluminum side panel
Double lined smooth galvanneal walls in horse area with 1-1/2" styrofoam
insulation
Tapered nose, (6' models) 6' to 54" with 16" radius corners for
efficient aerodynamics
(7' models) 7' to 60" with 16" radius corners for efficient
aerodynamics
Radius corner sliding window in each side of nose 19" x 53"
Treated floor
Bolt-on aluminum mill finish fenders
Extruded aluminum lower edge protector
Aluminum tread plate gravel guard
Steel hold backs on all full height doors and rubber hold backs on feed doors
Rubber dock bumper below rear door
AE graphic package
Tag bracket
Stall Area Equipment
Removable slant tubing dividers with solid head partition
Quick release slam latches on all dividers
Rear divider is telescoping
Stall area walls double lined with 16 gauge galvanneal steel and insulated with
1-1/2"styrofoam insulation
Rubber interior kick mat wall lining (1/4" thick) on rear doors, slant
wall, head wall, & butt wall
with 16 gauge galvanneal kick plates and 1-1/2" thick styrofoam insulation
underneath
Vet type rubber floor mats (5/8" thick)
Rear stall door, full height x (34" on 6' width and 41-1/2" on 7'
width) with all aluminum cast cam latch
and 14" x 16" radius corner sliding window
Aluminum framed drop-down feed doors with radius corner sliding windows
Extra heavy duty side access door in front stall on street side with an aluminum
framed drop-down
feed door and radius corner sliding window
Radius corner sliding windows (34" x 14") on butt wall and (14" x
16") on rear doors
Aluminum two-way flip-up roof vents in horse area
Feed bag rings (3 per stall)
Interior and exterior tie rings
Removable butt strap
Lights
DOT required lighting (stop, turn, tail, tag, marker, clearance &
conspicuity tape)
Double recessed tail lights
Two recessed rear exterior loading lights above rear door
Recessed exterior light at tack room door
Recessed dome lights (one in each stall, one in tack room and one in rear tack
compartment)
All dome lights and loading lights are on a separate circuit
Front Tack Room Equipment
Dimensions: 2' to 6'6" x (6' or 7') wide plus 7' gooseneck
Full height partition wall between stalls and front tack room
Camper type entry door, 30" x 66" (6'-6" tall model) or 30"
x 72" (7' tall model)
Front slant tack room with carpet
Aluminum tray and blanket bar in tack room
Roll-up camper vent in tack room (can be replaced with optional air conditioner)
Camper door with screen, radius corner sliding window and step underneath
Insulated and carpeted front tack room walls
Rear Tack Compartment Equipment
Dimensions: 54" long x 31"wide (7' wide model)
Choice of permanent rear tack with four carpeted saddle racks on a tree or rear
tack with fold-away wall and removable post with four carpeted saddle racks on a
tree
Aluminum brush tray on permanent rear tack door only
Blanket bar on rear tack door, Bridle hooks on rear tack wall
  
Click here for a
complete listing from Travlong.
The Bandit
..Standard
Features
- Length:
Gooseneck 14' 2H; 18' 3H; 20' 4H
- Width:
6'-8"
- Height:
7'
- Axles:
Torsion
axles with E-Z lube hubs and electric brakes
- Coupler:
2-5/16" Adjustable
- Siding:
Formed outside skin with plexiglass track, approx. 59"
- Nose:
Gooseneck - 42" Tapered
- Paint:
DuPont
- Wheels:
Mod
wheel with cap
- Tires:
Radials
- Gates:
One-piece rear gate to match siding height with H track, butterfly
latch with lockable hasp
- Flooring:
CCA pressure-treated wood
- Exterior
Accessories:
Exterior seams interior of dressing room and roof seams caulked,
Rubber bumper, Fenders and interior walls undercoated, Vinyl tape
and pinstripe, Safety chain with hooks, Breakaway switch and box,
Conspicuity tape, Exterior tie loops.
- Horse
Area:
Removable diagonal horse divider with slam latch, Access door
formed skins and plexi track, butterfly latch, ( no access door on
2H models),Interior dome lights, Interior tie loops.
- Dressing/Tack
Room:
Diagonal wall, Rubber mats, Clothes rod, Camper vent, Steel door
with 2 key latch on passenger side, Saddle rack, Tack hooks,
Blanket bar, Brush tray welded to door.
|
Back To Top |
